Contents: 1 x Matthews Black Flag (24 x 36") 1 x Matthews Open-End Single Scrim (24 x 36", Black) 1 x Matthews Open-End Double Scrim (24 x 36", Black) 1 x Matthews Open-End Scrim with White Artificial Silk (24 x 36") 1 x Carry Case with Strap The 24 x 36" Black Flag from Matthews has a rectangular frame with a 3/8" top pin for mounting on a grip head. It should be noted that while the fabric covers the frame almost completely, the pin and its brace are of a bare metal, silver color. Used to control natural or artificial light, the black flag can also be used to protect the camera lens from flares, control spill light from other sources, or keep light from reaching an area on the set. Newly designed 90° flag frames will make it possible to position the instrument over the top of the set wall or use two or more units to create a box for better light control. The 24 x 36" black Open-End Single Scrim from Matthews is made of spring steel with a 3/8" pin and support which can be used to hang the scrim from the C-stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the frame without causing a shadow. The 24 x 36" black Open-End Double Scrim from Matthews is made of spring steel with a 3/8" pin and support which can be used to hang the scrim from the C-stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the frame without causing a shadow. The 24 x 36" Open-End Scrim with White Artificial Silk from Matthews is made of spring steel with a 3/8" pin and support which can be used to hang the scrim from the C-stand handle when not in use. The two upright arms of the frame are slotted at the two open ends to retain the piano wire woven through the fabric to make up the fourth side of the frame without causing a shadow. Open Ends are used to control or manipulate light falling on certain areas of the set or subject. They can be used to soften or reduce light without a noticeable edge. A color-coded binding is used around the frame to identify the fabric. Open-end frames are black powder coated to minimize unwanted reflections.