Deity V-Mic D3 Pro Shotgun Mic

Owned by Jag N

5/5

Identified

Usually responds within a few hours

100% response rate

Southfield 6 mi

Damages are covered without any excess. Read more

Description

The World’s First Smart Microphone: Inside the V-Mic D3 Pro lives a microprocessor that digitally shakes hands with the audio input it’s been plugged into. The D3 Pro will work with a phone, tablet, DSLR, body pack transmitters; just about anything with a 3.5mm microphone jack. We have tested it on a dozen DSLR models, two dozen phones, a handful of Android based tablets, and the microphone inputs on laptops. When plugged into devices that have a stereo microphone input, the V-Mic D3 Pro outputs dual mono tracks. It can also be adapted to some microphone inputs that use the mini XLR jack. The World’s Only Microphone with a Stepless Gain Knob: The V-Mic D3 Pro features a +20dB step-less analog gain adjustment dial. On each side of the dial the V-Mic D3 Pro features a bump guard that helps prevent the dial from being accidentally rotated. The +20dB of gain is added on a linear scale so you can dial in the exact amount of gain you need for the shot. Internal Battery: Inside the V-Mic D3 Pro lives a 320mAh Lithium Ion battery. Run time for the V-Mic D3 Pro is 51 hours and a standby time of 74hrs. The battery is charged in a little less than 2 hrs. On-Board Low Cut Filters: The V-Mic D3 Pro features two levels of low cut: 75hz and 150hz. And instead of a switch that is sunken into the frame that’s hard to toggle, the D3 Pro does it all with a single button on top of the unit. With two levels of low cut the V-Mic D3 Pro is ready for even the windiest day. Rycote Shock Mount: We partnered with Rycote to design this unique, one of a kind on-camera shock mount. Our design allows you to mount the D3 Pro how ever you want: forward, middle, back. This means you can center it over your camera for perfect balance when using a gimbal. Underneath the hot shoe you will find a threaded female mounting point so you can mount it with a friction arm and use the V-Mic D3 Pro as a plant mic.