RODE NT5 Microphones (Matched Pair) + Stereobar

Castle, 88.4 mi

Owned by Leicester Camera Hire

5/5

Identified

Usually responds within a few hours

100% response rate

Castle 88.4 mi

Damages are covered without any excess. Read more

Description

In The Box 2 x RODE NT5 Condenser Microphone 1 x RODE Custom Carry Case 2 x Windsheild 2 x Microphone mounts 1 x RODE 20cm Stereo Array Spacing Bar Overview Not all microphone are created equal, and there can be subtle variations between identical models. This isn’t ideal when creating stereo recordings, as these variations can result in an inconsistent sound from one ear to the other. A matched pair of microphones means you have two mics as close to the same frequency response as possible. This means when using the mics for a stereo recording, you are more like to get a consistent sound across the left and right channels. The NT5 is RØDE's premier small-diaphragm cardioid condenser microphone, sometimes referred to as a 'pencil mic'. Intended for recording acoustic instruments, drum overheads, cymbals and live performances, these compact externally polarized mics employ a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer. Their tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom. • Externally biased condenser • Gold sputtered 1/2” capsule • Heavy-duty satin-nickel plated body • Dual power operation • Surface mount circuitry • Low noise • Full frequency response SPECIFICATIONS Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 0.50" Polar Pattern: Cardioid Address Type: End Frequency Range: 20Hz - 20kHz Output Impedance: 100Ω Maximum SPL: 143dBSPL Maximum Output Level: 13.9mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity: -38.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted): 16dBA Power Options: +24V phantom power +48V phantom power Weight: 101g each Dimensions: 118.00mmH x 20.00mmW x 20.00mmD Output: XLR Output