CUSTOM CAR MOUNT RIG GRIP HEAVY DUTY CUSTOM
Owned by Ridge R
Identified
Usually responds within a few minutes
93% response rate
Wandle 6.7 mi
Film and photography equipment is insured with no excess in the event of damage. Read more
Description
SEE HOME PAGE FOR FULL KIT LIST 9.SOLUTIONS RIG⭐️⭐️⭐️⭐️⭐️ (Priced per unit) HEAVY DUTY RIG 1x Multi-Purpose Cheese Plate * With the possibility to build construction out of the lateral threaded blocks * 3 Blocks positioned at the corners, each with lateral and lower 3/8"-16 threaded holes * Elongated centre slot (10 x 36 mm) allows accurate positioning of ball heads * 10 mm through holes and 4 1/4"-20 tapped holes with industry standard 1" centre distance * Connection options: top plate, 10 x 36 mm slotted hole, 12x 3/8" (10 mm) through holes (each 10 mm hole in top plate is spaced 1" apart), 10x 1/4"-20 threaded holes, 3x corner blocks, 3x 3/8"-16 threaded side holes, 3/8"-16 threaded bottom hole * Weight: 4480 g * Incl. 3x 3/8"-16 rod clamps (can be positioned in any 3/8"-thread) £10 CAMERA ACCESSORIES AVAILABLE * FLUID HEADS * Z AXIT HEADS * BALL HEADS * L / VERTICAL BRACKETS * DJI RS GIMBAL MOUNT 5/8 (16mm) RODS Anodised Aluminium Threaded Rods Female Thread 3/8” / Connector per pair 4x 1000mm 4x 750mm 4x 500mm 4x 250mm £5 6x Pair 3.5 inch Baby Pin Set * Short threaded rods to extend the flexible mounting possibilities of 9.solutions clamps * Set contains 2x baby pins, 1x 3/8" male thread and 1x 3/8" female thread per rod * Material: Hard anodised aluminium * Length: 8.89 cm * Weight per rod: 55g * Pair well with suction cups £2 8x 9.solutions Suction Cup * Allows a variety of recording options * Mounting: 9x 3/8" Threaded bushing, * 10x 1/4" threaded bushing, * 2x 3/8" bar clamp * Weight: 365 g * Pair well with 3.5 baby pin £5 GAGS / ROD CONNECTORS 6x 5/8" Dual Knob Gag Flexible connector for 5/8" Rods and 3/8" Rods * Opening on both sides for 3/8" (10 mm) and 5/8" (16 mm) rods * Can be opened and tightened independently * Easy handling due to large wing screws * Weight: 340 g £2 6x 5/8” Gag Open Connector for 2x 5/8" rods * For easy positioning at any angle * 2x Opening for 5/8" (16 mm) rod * Weight: 160g £2 4x 5/8"+ 3/8" Gag Closed Connector for 3/8" and 5/8" rods * For easy positioning at any angle * 2x Hole for 5/8" (16 mm) Rod and 1x hole for 3/8" (10 mm) Rod * Weight: 165g £2 4x 3/8" Gag Connector for 2x 3/8" rods * Mounting types: 2x 3/8" (10 mm) clamp * Weight: 61g £2 CLAMPS 4x Savior Clamp With Stud Universal Retaining Clip with 16 mm Pin * Special jaws that grip firmly on any irregular profile * Can be mounted to round, square or flat profiles * For pin size: 0 - 60 mm * Max. load capacity: 30 kg * Mounting types: 2 x 1/4"-20 threaded hole, 2 x 3/8"-16 threaded hole, 1 x 5/8" pin with 3/8" end * Weight: 455g £5 2x Python clamp mini * Mounting sizes: 8 - 35 mm tubes * Max. load bearing capacity: 5kg * Weight: 137g * 1x 5/8" (16 mm) pass-thru receptacle * 1x 3/8" (10 mm) pass-thru receptacle £2 4x Grip Joint * Join 10 mm to 16 mm * Max. Load capacity: 5 kg * Weight: 95g * 1x 5/8" (16 mm) pass-thru receptacle * 1 x 3/8" (10 mm) pass-thru receptacle * 1 x 1/4" - 20 female thread * 3 x 3/8" - 16 female thread £2 2x Snap-in socket * Max. Load capacity: 20kg * 1x 3/8"-16 threaded bush * 3/8" Pin take-up * 5/8" (16 mm) bolt £2 Double joint arms * Ball joints on both ends * The locking is via a point clamping mechanism * Each ball joint has a 5/8 "bolt with a 3/8" -16 female thread * Easy locking of lamps, cameras, monitors and a variety of devices at any angle * Fittings: 2x 5/8 "spigot with 3/8" -16 threaded bush TINY * Tiny version with 260mm * Max. Carrying capacity: 18kg * Weight: 510g £2 SHORT * Short version with 360 mm * Max. Carrying capacity: 14kg * Weight: 680g £5 MEDIUM * Medium version with 460mm * Max. Load capacity: 9kg * Weight: 810g £5 LONG * Weight: 680g * Max. Carrying capacity: 5kg * Weight: 1050g £5 LIGHT WEIGHT RIG (GOPRO / 360 cam) 3/8 (10mm) RODS Anodised Aluminium Threaded Rods Male Thread 3/8” 4x 1000mm 4x 750mm 4x 500mm 4x 250mm £2 3/8" Finger & connecting nut * Contains 12x 3/8" threaded nuts and 6x 3/8" connecting nuts 29 mm * Suitable for
Cancellation Terms
Free cancellation until 2 days before your rental starts. After that, you'll get half your money back until the day before. Read more
Approximate location
Exact location provided after booking
Reviews
Joel M borrowed CUSTOM CAR MOUNT RIG GRIP HEAVY DUTY CUSTOM
Great experience, would definitely recommend
Reviews for other items belonging to Ridge R
Nick G borrowed PUBLIC SPEAKING KIT, SENNHEISER, HAND HELD WIRELESS MIC, SPEAKER, STAND,
Great renter. all the kit was in perfect condition
October 2026
Sun
Mon
Tue
Wed
Thu
Fri
Sat
27
28
29
30
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Select rental period
Prices for all periods
Select days in the calendar to see the exact price.
£25
1 day
£75
3 days
£100
7 days
Report listing